LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 484 (Body Control Systems - Diagnostics) >> Circuit Inspection >> Power Main Relay Circuit >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check power main relay (Marking: POWER) (See  INSPECTION  ). 
    1. NG : Replace power main relay. 
    2. OK : Go to next step. 
  2. Check for harness and connector between power main relay (Marking: POWER) and passenger side ECU, and battery and power main relay. 
    1. NG : Repair or replace harness and connector. 
    2. OK : Proceed to next circuit inspection shown in problem symptoms table (See  PROBLEM SYMPTOMS TABLE   ). 
scientia non olet · About LEMON Manuals