LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 628 (Navigation System - Diagnostics) >> Current Position Display Does Not Appear >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK RADIO AND NAVIGATION ASSY 
    1. Check if a map disc is inserted in the map disc slot.

      Standard: A map disc is inserted. 

      Fig 1: Identifying Map Disc Slot
      G02895047Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG: INSERT THE MAP DISC IN THE "MAP" SIDE SLOT 
    2. OK: Go To Next Step 
  2. CHECK THE MAP DISC 
    1. Check that the map disc is not deformed or cracked.

      Standard: No deformations or cracks appear on the map disc. 

      Fig 2: Identifying MAP Disc Position
      G02895048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. NG: REPLACE THE MAP DISC 
    2. OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (see  PROBLEM SYMPTOMS TABLE  )