On-Vehicle Inspection

WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

CHECK INTAKE AIR CONTROL SYSTEM

Using a 3-way connector, connect a vacuum gauge to the actuator hose.

Fig 1: Connecting Vacuum Gauge To Actuator Hose

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Connect the hand-held tester to the DLC3.
Start the engine.

On the hand-held tester, enter the ACTIVE TEST mode.

Standard:

VACUUM REFERENCE CHART

Switch Condition	Vacuum
VSV ON	Approx. 27.6 kPa (200 mmHg, 7.9 in.Hg)
VSV OFF	0 kPa (0 mmHg, 0 in.Hg)

Move the shift lever to the P position.
While operating the accelerator pedal, check open and closed status of the IAC valve No. 1 (IMZ-FE only) and No. 2.
HINT:

Values indicated in the illustration are for reference only. The throttle valve open position varies by engine speed.

Fig 2: Engine Speed - Throttle Valve Open Position Graph
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002