Steering Column Opening Cover: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

Place the steering opening column cover into position (Fig 1 ).
Install snap tab just left of steering column. Engage locator tab on right. Starting from upper right corner engage clip, at lower right squeeze clip to lower right panel. Engage left clip.
Install two screws attaching the steering column opening cover to instrument panel.

Fig 1: Exploded View Of Lower Instrument Panel Components
Courtesy of DAIMLERCHRYSLER CORP.