Removal & Installation (ES300 & RX300)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2000 Lexus SC 400, 2000 Lexus SC 300, 2000 Lexus RX 300, 2000 Lexus LX 470, and 2000 Lexus LS 400. However, it is still accessible from the selected car via links, so may be relevant.
- VVT sensor may also be referred to as camshaft position sensor. One Variable Valve Timing (VVT) sensor is mounted in outer corner of each cylinder head, just below valve cover (oil filler cap end). Remove engine cover. Remove air cleaner hose and resonator from between air cleaner and air intake chamber. Disconnect VVT sensor 2-pin connector. Remove bolt, VVT sensor and "O" ring.
- To install, reverse removal procedure. Use NEW "O" ring when installing VVT sensor. Tighten VVT sensor bolt to specification. See TORQUE SPECIFICATIONS .