Possible Causes
WARNING: This page is about a different car, the 2003 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0335 uses two-trip detection logic. DTC P0335 is set when ECM does not receive input signal from crankshaft position sensor when engine is cranking or with engine speed 600 RPM or more. DTC P1335 is set when ECM does not receive input signal from crankshaft position sensor when cranking or engine is running at 1000 RPM or more. Possible causes are:
- Crankshaft position sensor circuit is open or shorted.
- Defective crankshaft position sensor.
- Defective signal plate.
- Defective ECM.