LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Servicing - A/T) >> Removal & Installation >> Vehicle Speed Sensor >> On-Vehicle Repair
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Repair

WARNING: This page is about a different car, the 2004 Lexus IS 300 and 2003 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE NO. 1 AND NO. 2 ENGINE UNDER COVERS 
  2. REMOVE LH FRONT FLOOR CENTER COVER 
  3. REMOVE NO. 1 REAR FLOOR BOARD 
  4. DISCONNECT VEHICLE SPEED SENSOR CONNECTOR 
  5. REMOVE VEHICLE SPEED SENSOR 
    1. Remove the bolt and vehicle speed sensor.
    2. Remove the O-ring from the vehicle speed sensor.
  6. INSTALL VEHICLE SPEED SENSOR 
    1. Coat a new O-ring with ATF and install it to the vehicle speed sensor.
    2. Install the vehicle speed sensor to the extension housing and torque the bolt.

      Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf) 

  7. INSTALL NO. 1 REAR FLOOR BOARD 
  8. INSTALL LH FRONT FLOOR CENTER COVER 
  9. INSTALL NO. 1 AND NO. 2 ENGINE UNDER COVERS 
    Fig 1: Removing O-Ring From Vehicle Speed Sensor
    G01314522Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals