Torque Specifications
WARNING: This page is about a different car, the 2004 Toyota Camry Solara and 2003 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Generator Mounting Bolt | ||||
| 4-Cylinder | ||||
| 2003 | ||||
| 12mm | 15 (21) | |||
| 14mm | 38 (52) | |||
| 2004 | ||||
| 8mm | 15 (21) | |||
| 10mm | 38 (52) | |||
| V6 | ||||
| Pivot bolt | ||||
| 2003 | 41 (56) | |||
| 2004 | 43 (58) | |||
| Adjustment Lock Bolt | 13 (18) | |||
| Pulley Nut | 81 (111) | |||
| INCH Lbs. (N.m) | ||||
| Battery Wire Terminal Nut | 36 (4.1) | |||
| Bearing Retainer Bolt | ||||
| 2003 | 27 (3.0) | |||
| 2004 | 20 (2.3) | |||
| Brush Holder Bolt | ||||
| 2003 | 18 (2.0) | |||
| 2004 | 16 (1.8) | |||
| Drive End Frame Nut | ||||
| Without Cord Clip | 39 (4.5) | |||
| With Cord Clip | 47 (5.4) | |||
| Generator Holder With Rectifier | 26 (2.9) | |||
| Generator Rear End Cover | ||||
| Screw | 35 (3.9) | |||
| Nut | ||||
| 2003 | 40 (4.5) | |||
| 2004 | 41 (4.6) | |||
| Regulator Assembly | 18 (2.0) | |||