LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Engine Controls - System & Component Testing) >> Engine Sensors & Switches >> Park/Neutral Position Switch >> A/T Models
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/T Models

WARNING: This page is about a different car, the 2002 Lexus LX 470. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect electrical connector at Park/Neutral Position (PNP) switch. PNP switch is mounted on side of transmission. Note terminal identification. See Fig 1.
  2. Using ohmmeter, check for continuity between specified terminals with shift lever in proper positions. See PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS  table. If proper continuity cannot obtained, adjust or replace PNP switch as necessary.
PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS

Gear Position Terminals No.
Park 1-3 & 6-9
Reverse 2-3
Neutral 3-5 & 6-9
Drive 3-7
2 3-4
Low 3-8
Fig 1: Identifying Park/Neutral Position Switch Gray 9-Pin Connector Terminals
G99F52840Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002