Typical Enabling Conditions
WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | See PRE-CHECK |
| Battery voltage | 11 V or more |
| Fuel system | Closed Loop (for 13 sec. or more) |
| Warm-up condition to enable air fuel ratio learning control | The conditions are met |
| Either of the following conditions is met: | - |
| Engine RPM | Less than 1,100 RPM |
| Intake air amount per revolution | 0.22 g/rev or more |