LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Transmission Control System) >> Shift Lever ASSY >> Overhaul
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Lever ASSY: Overhaul

WARNING: This page is about a different car, the 2004 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT PANEL REGISTER ASSY NO.1 (SEE  INSTRUMENT PANEL SUB-ASSY  ) 
  2. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER (SEE  INSTRUMENT PANEL SUB-ASSY  ) 
  3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY UPPER (SEE  INSTRUMENT PANEL SUB-ASSY  ) 
  4. REMOVE INSTRUMENT PANEL REGISTER ASSY NO.3 (SEE  INSTRUMENT PANEL SUB-ASSY  ) 
  5. REMOVE SHIFT LEVER ASSY 
    1. Remove the 3 bolts.
    2. Disconnect the 2 connectors and remove the shift lever assy.
    Fig 1: Locating Bolts Of Shift Lever Assy For Removal
    G02921104Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE INDICATOR LAMP WIRE SUB-ASSY 
    1. Remove the position indicator lamp wire from the position indicator housing.
      Fig 2: Removing Position Indicator Lamp Wire From Position Indicator Housing
      G02921105Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Separate the connector from the 3 clamps and remove the position indicator lamp wire.
    3. Remove the cover.
      Fig 3: Removing Cover And Position Indicator Lamp Wire
      G02921106Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bulb and cap from the position indicator lamp wire.
    Fig 4: Removing Bulb And Cap From Position Indicator Lamp Wire
    G02921107Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL INDICATOR LAMP WIRE SUB-ASSY 
    1. Install the bulb and cap to the position indicator lamp wire.
      Fig 5: Installing Bulb And Cap To Position Indicator Lamp Wire
      G02921108Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector and 3 clamps.
    3. Install the cover.
      Fig 6: Installing Cover And Clamps
      G02921109Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install the position indicator lamp wire to the position indicator housing.
    NOTE:
    • Securely attach by twisting to the right.
    Fig 7: Installing Position Indicator Lamp Wire To Position Indicator Housing
    G02921110Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL SHIFT LEVER ASSY 
    1. Install the 2 connectors to the shift lever assy.
    2. Install the shift lever assy with the 3 bolts.
      1. Torque: 12 N.m (122 kgf.cm, 9 ft.lbf) 
    Fig 8: Locating Bolts Of Shift Lever Assy For Installation
    G02921111Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSPECT SHIFT LEVER ASSY (SEE  ON-VEHICLE INSPECTION   ) 
scientia non olet · About LEMON Manuals