Inspection Procedure

WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

Check the power window master switch using TOYOTA hand-held tester.
PREPARATION:

Connect the TOYOTA hand-held tester to the DLC3.

CHECK:

Check the power window master switch using DATA LIST.

OK:
1. Driver side:
  
  Fig 1: Driver Side Switch Position
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Passenger side:
  
  Fig 2: Passenger Side Switch Position
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. OK : Proceed to next circuit inspection shown on problem symptoms table (See PROBLEM SYMPTOMS TABLE ).
2. NG : Replace the driver door ECU.