How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
The hand-held tester can be used at step 5 and 8.
- VEHICLE BROUGHT TO WORKSHOP
- Go to next step.
- CUSTOMER PROBLEM ANALYSIS (SEE CUSTOMER PROBLEM ANALYSIS CHECK
)
- Go to next step.
- CHECK TIRE PRESSURE WARNING LAMP CONDITION
- Turn the ignition switch to the ON position.
- Record the condition of the tire pressure warning lamp on the combination meter assy.
- Refer to the "TIRE PRESSURE WARNING DISPLAY FUNCTION" section of the DIAGNOSIS SYSTEM for checking the condition of the tire pressure warning lamp (see DIAGNOSIS SYSTEM ).
- Go to next step.
- PROBLEM SYMPTOMS TABLE (SEE
PROBLEM SYMPTOMS TABLE )
- Go to next step.
- CIRCUIT INSPECTION (SEE STOP LAMP SWITCH CIRCUIT
to
AMBIENT TEMPERATURE SENSOR CIRCUIT )
- Go to next step.
- IDENTIFICATION OF PROBLEM
- Go to next step.
- REPAIR
- Go to next step.
- CONFIRMATION TEST
- END