LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 695 (Navigation System - Diagnostics) >> Black Screen (No Image Appears On Navigation And Audio Screen) >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DISPLAY SETTING 
    1. Check that the display is not in "Screen OFF" mode.

      OK: The display setting is not in "Screen OFF" mode. 

    1. NG: CHANGE SCREEN TO "SCREEN ON" MODE 
    2. OK: Go to Next Step. 
  2. CHECK IMAGE QUALITY SETTING 
    1. Check if screen color quality can be set.

      OK: Screen color quality can be set. 

    1. OK: PRESS PANEL SWITCH "DISPLAY" AND SET SCREEN COLOR QUALITY TO NORMAL 
    2. NG: Go to Next Step. 
  3. CHECK CABIN 
    1. Check if condensation is likely to occur, or the temperature is high or low (extremely cold) in the cabin.

      HINT:

      This problem occurs when the cabin is humid and the temperature rapidly changes. This condition may produce condensation, resulting in a short circuit.

      OK: The above conditions are not observed. 

    1. NG: SET CABIN TEMPERATURE TO APPROPRIATE DEGREES (20 TO 30°C) (68 TO 86°F) 
    2. OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (SEE  PROBLEM SYMPTOMS TABLE  )