How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2004 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use these procedures to troubleshoot the theft deterrent system.

VEHICLE BROUGHT TO WORKSHOP
1. Go To Next Step
CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK (See CUSTOMER PROBLEM ANALYSIS CHECK )
1. Go To Next Step
PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
1. If the fault is not listed on the problem symptoms table, proceed to A.
2. If the fault is listed on the problem symptoms table, proceed to B.
1. B : Go to step 5
2. A : Go to Next Step.
OVERALL ANALYSIS AND TROUBLESHOOTING
1. Terminals of ECU (see TERMINALS OF ECU )
2. On-vehicle inspection (see ON-VEHICLE INSPECTION )
1. Go To Next Step
ADJUST, REPAIR OR REPLACE
1. Go To Next Step
CONFIRMATION TEST
1. Go To Next Step
2. END