Section 936 (Audio System & Video System): Audio/Video: Description

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.

An audio system is standard equipment. A rear seat video system is an available option. Two radio receivers are offered. The audio/video system uses an ignition switched source of battery current so that the system will only operate when the ignition switch is in the RUN or ACCESSORY/ACCESSORY DELAY positions.

The audio/video system includes the following components:

Amplifier
Antenna integral to the right quarter glass
CD/DVD changer (if equipped)
Radio noise suppression components
Radio receiver
Speakers
Video screen

Certain functions and features of the audio/video system rely upon resources shared with other electronic modules in the vehicle over the Programmable Communication Interface (PCI) bus network. The data bus network allows the sharing of sensor information. For diagnosis of these electronic modules or of the data bus network, the use of a DRB III(R) scan tool and ELECTRONIC CONTROL MODULES are recommended.

For complete circuit diagrams, refer to SYSTEM WIRING DIAGRAMS .