Definition Of Terms
WARNING: This page is about a different variant/trim than selected.
TERM DEFINITION
| Term | Definition |
|---|---|
| Monitor description | Description of what the ECM monitors and how it detects malfunction (monitoring purpose and its details) |
| Related DTCs | Diagnostic code |
| Typical enabling condition | Preconditions that allow the ECM to detect malfunction |
| Typical enabling condition | With all preconditions satisfied, the ECM sets the DTC when the monitored value(s) exceeds the malfunction threshold(s) |
| Sequence of operation | The priority order that is applied to monitoring, if multiple sensors and components are used to detect the malfunction |
| Sequence of operation | While another sensor is being monitored, the next sensor or component will not be monitored until the previous monitoring has concluded |
| Required sensor/components | The sensors and components that are used by the ECM to detect malfunction |
| Frequency of operation | The number of times that the ECM checks for malfunction per driving cycle |
| Frequency of operation | "Once per driving cycle" means that the ECM detects malfunction only one time during a single driving cycle "Continuous" means that the ECM detects malfunction every time when enabling condition is met |
| Duration | The minimum time that the ECM must sense a continuous deviation in the monitored value(s) before setting a DTC. This timing begins after the "typical enabling conditions" are met |
| Malfunction thresholds | Beyond this value, the ECM will conclude that there is malfunction and set a DTC |
| MIL operation | MIL illumination timing after a defect is detected |
| MIL operation | "Immediately" means that the ECM illuminates the MIL the instant the ECM determines that there is malfunction "2 driving cycle" means that the ECM illuminates the MIL if the same malfunction is detected again in the 2nd driving cycle |