Cigarette Lighter Assembly: Replacement
NOTE:
- REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSY (M/T TRANSAXLE) (See REPLACEMENT )
- REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CTR (See REPLACEMENT )
- REMOVE CIGARETTE LIGHTER COVER
- Release the 2 fitting claws, remove the cigarette lighter cover.
- REMOVE CIGARETTE LIGHTER ASSY
- Remove the cigarette lighter knob and element assy.
- Turn the socket in the circumference direction as shown in Fig 2 , disengage the claw between the socket and the cigarette lighter bezel stay, and push out the socket to the room side.
- Align the socket with the notch on the cigarette lighter bezel stay, remove the cigarette lighter assy to the room side.
- INSTALL CIGARETTE LIGHTER ASSY
- Align the socket with the notch on the cigarette lighter bezel stay, push the cigarette lighter assy into as hard as possible and install it.
- Install the cigarette lighter knob and element assy.