Circuit Description
WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
Knock sensor No. 1 generates voltage when engine block vibrates due to knocking. DTC is set when ECM does not receive input signal from knock sensor No. 1 with engine speed of 2000-5600 RPM. If DTC P0325 exists, ECM will operate in fail-safe mode which retards the ignition timing to a maximum setting. Possible causes are:
- Knock sensor No. 1 circuit is open or shorted.
- Defective or loose knock sensor No. 1.
- Defective ECM.