Radio Receiver Assembly: Replacement

NOTE:

REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CENTER (See REPLACEMENT )
REMOVE RADIO RECEIVER ASSEMBLY W/BRACKET
1. Remove the 4 screws.
2. Disconnect the clamp from the radio bracket No. 2.
3. Disconnect the connectors, then remove the radio receiver assembly w/bracket.
  
  Fig 1: Removing Radio Receiver Assembly w/Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIO BRACKET No. 1
1. Except Indash CD Changer:
  Remove the 4 screws and radio bracket No. 1.
  
  Fig 2: Removing Screws Of Radio Bracket No. 1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Indash CD Changer:
  Remove the 3 screws and radio bracket No. 1.
  
  Fig 3: Removing Radio Bracket Screws No. 1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIO BRACKET No. 2.
1. Remove the 4 screws and radio bracket No. 2.
  
  Fig 4: Removing Radio Bracket Screws (No. 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIO RECEIVER ASSY