Headlamp Leveling Ecu: Replacement
WARNING: This page is about a different car, the 2004 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT BATTERY NEGATIVE TERMINAL (SEE SAFETY PRECAUTIONS )
- REMOVE GLOVE COMPARTMENT DOOR ASSY (SEE INSTRUMENT PANEL SUB-ASSY )
- REMOVE ECM (SEE ECM (1NZ-FXE) )
- REMOVE HEADLAMP LEVELING ECU ASSY
- Disconnect the connector.
- Remove the bolt and the headlamp leveling ECU assy.
- INSTALL ECM (SEE ECM (1NZ-FXE) )
- CONNECT BATTERY NEGATIVE TERMINAL (SEE SAFETY PRECAUTIONS )
- PERFORM INITIALIZATION (SEE INITIALIZATION )