Cruise Control Switch: Installation
WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Before installing steering wheel, ensure spiral cable is properly aligned. See SPIRAL CABLE under ADJUSTMENTS under STEERING COLUMN SWITCHES article in ACCESSORIES & EQUIPMENT. Tighten steering wheel nut to 37 ft. lbs. (50 N.m). Tighten steering wheel pad Torx screws to 78 INCH lbs. (8.8 N.m).
- After steering wheel and steering wheel pad are installed, ensure proper operation of air bag system by turning ignition switch to ACC or ON position. AIR BAG warning light should illuminate for about 6 seconds. If AIR BAG warning light remains illuminated for more than 6 seconds, air bag system is malfunctioning and needs repair.
- Turn ignition switch off. If AIR BAG warning light illuminates with ignition switch off, a short circuit may be present in AIR BAG warning light circuit.