Wiper Motor Circuit
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect the connector from the motor and inspect the connector on the wiring harness side. See CONNECTOR IDENTIFICATION . See INSPECTING WIPER MOTOR CIRCUIT table. If the circuit is not as specified, inspect the circuits connected to other parts.
INSPECTING WIPER MOTOR CIRCUIT
| Tester Connection | Condition | Specified Condition | ||
|---|---|---|---|---|
| 5 - Ground | Constant | Continuity | ||
| 1 - Ground | Wiper Switch OFF Or INT, HIGH (1) | No Voltage | ||
| 1 - Ground | Wiper Switch LOW (1) | B+ Voltage | ||
| 2 - Ground | Ignition Switch LOCK Or ACC | No Voltage | ||
| 2 - Ground | Ignition Switch ON | B+ Voltage | ||
| 4 - Ground | Wiper Switch OFF Or INT, LOW (1) | No Voltage | ||
| 4 - Ground | Wiper Switch HIGH (1) | B+ Voltage | ||
|
||||