Installation (Front Doors)
WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Apply multipurpose grease to sliding and rotating parts of door lock assembly, glass guide and rollers of window regulator assembly. Before installing power door lock assembly, apply Three Bond 1324 Adhesive (08833-00070) to all 3 lock assembly Torx screws. Power window motor must be re-initialized upon reinstallation. See RESETTING POWER WINDOW MOTOR RESET & PULSE SWITCHES under ADJUSTMENTS. Ensure all rivets are properly installed and are secure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS .