LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Wheel Alignment Specifications & Adjustment Procedures) >> CELICA >> Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 236 (Wheel Alignment Specifications & Adjustment Procedures): CELICA: Specifications

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
REAR

Cold tire inflation pressure 1ZZ-FE engine models
195/60R15 88H
P195/60R15 87H
Front, rear 210 kPa (2.1 kgf/cm2 , 29 psi)
2ZZ-GE engine models
205/55R15 87V
P205/55R15 87V
205/50R16 87V
Front, rear 220 kPa (2.2 kgf/cm2 , 32 psi)
Front Wheel alignment Vehicle height    
Tire size: 195/60R15, P195/60R15 Front*1 190 mm (7.48 in.)
Rear*2 224 mm (8.82 in.)
Tire size: 205/55R15, P205/55R15 Front*1 190 mm (7.48 in.)
Rear*2 226 mm (8.90 in.)
Tire size: 205/50R16 Front*1 193 mm (7.60 in.)
Rear*2 225 mm (8.86 in.)
Camber    
195/60R15, P195/60R15 -0°28' ± 45' (-0.47° ± 0.75°)
205/55R15, P205/55R15 -0°25' ± 45' (-0.42° ± 0.75°)
205/50R16 -0°29' ± 45' (-0.48° ± 0.75°)
Right-left error 45' (0.75°) or less
Caster    
195/60R15, P195/60R15 2°07' ± 45' (2.12° ± 0.75°)
205/55R15, P205/55R15 2°01' ± 45' (2.02° ± 0.75°)
205/50R16 2°02' ± 45' (2.03° ± 0.75°)
Right-left error 45' (0.75°) or less
Steering axis inclination    
195/60R15, P195/60R15 13°09' ± 45' (13.15° ± 0.75°)
205/55R15, P205/55R15 13°04' ± 45' (13.07° ± 0.75°)
205/50R16 13°12' ± 45' (13.20° ± 0.75°)
Right-left error 45' (0.75°) or less
Toe-in (total)   0° ± 12' (0° ± 0.2°, 0 ± 2 mm, 0 ± 0.08 in.)
Rack end length difference 1.5 mm (0.059 in.) or less
Wheel angle    
195/60R15, P195/60R15 Inside wheel 38°41' ± 2° (38.68° ± 2°)
Outside wheel: Reference 33°20' (33.33°)
205/55R15, P205/55R15 Inside wheel 38°46' ± 2° (38.77° ± 2°)
Outside wheel: Reference 33° 25' (33.42°)
205/50R16 Inside wheel 38°38' ± 2° (38.63° ± 2°)
Outside wheel: Reference 33°19' (33.32°)
Rear wheel alignment Camber   -1° 11' ± 45' (-1.18° ± 0.75°)
Right-left error 45' (0.75°) or less
Toe-in (total)   0°18' ± 12' (0.3° ± 0.2°, 3 ± 2 mm, 0.12 ± 0.08 in.)
Toe-in cross measurement difference 6 mm (0.24 in.) or less
Front axle Axle bearing backlash Maximum 0.05 mm (0.0020 in.)
Axle hub deviation Maximum 0.07 mm (0.0028 in.)