April 5, 2026: LEMON Manuals is launched! Read the announcement.

Section 273 (Wheel Alignment Specifications & Adjustment Procedures): Specifications

WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

Front Wheel Alignment Specifications (Sequoia)

Cold tire inflation pressure

Tire size: P245/70R16

Front

220 kPa (2.2 kgf/cm² , 32 psi)

Rear

240 kPa (2.4 kgf/cm² , 35 psi)

Tire size: P265/70R16

Front

220 kPa (2.2 kgf/cm² , 32 psi)

Rear

220 kPa (2.2 kgf/cm² , 32 psi)

Tire size: P265/65R17

Front

220 kPa (2.2 kgf/cm² , 32 psi)

Rear

220 kPa (2.2 kgf/cm² , 32 psi)

Front wheel Alignment

Vehicle height

UCK35L-GKSSKA

Tire size: P245/70R16

Front: A⁽¹⁾ - B⁽²⁾

69.8 mm (2.75 in.)

Rear: C⁽³⁾ - D⁽⁴⁾

76.2 mm (3.00 in.)

Tire size: P265/70R16 and P265/65R17

Front A⁽¹⁾ - B⁽²⁾

69.6 mm (2.74 in.)

Rear: C⁽³⁾ - D⁽⁴⁾

75.5 mm (2.97 in.)

UCK35L-GKSLKA

Front A⁽¹⁾ - B⁽²⁾

71.5 mm (2.81 in.)

Rear: C⁽³⁾ - D⁽⁴⁾

77.2 mm (3.04 in.)

UCK45L-GKSSKA

Front A⁽¹⁾ - B⁽²⁾

61.7 mm (2.43 in.)

Rear: C⁽³⁾ - D⁽⁴⁾

63.8 mm (2.51 in.)

UCK45L-GKSLKA

Front A⁽¹⁾ - B⁽²⁾

62.7 mm (2.47 in.)

Rear: C⁽³⁾ - D⁽⁴⁾

65.2 mm (2.57 in.)

Camber

Right-left error 30' (0.5°) or less

UCK35L-GKSSKA

0°08' ± 45' (0.14° ± 0.75°)

UCK35L-GKSLKA

0°06' ± 45' (0.10° ± 0.75°)

UCK45L-GKSSKA

0°17' ± 45' (0.28° ± 0.75°)

UCK45L-GKSLKA

0°16' ± 45' (0.26° ± 0.75°)

Caster

Right-left error: 30' (0.5°) or less

UCK35L-GKSSKA

Tire size: P245/70R16

2°56' ± 45' (2.93° ± 0.75°)

Tire size: P265/70R16 and P265/65R17

2°59' ± 45' (2.98° ± 0.75°)

UCK35L-GKSLKA

3°02' ± 45' (3.04° ± 0.75°)

UCK45L-GKSSKA

2°36' ± 45' (2.60° ± 0.75°)

UCK45L-GKSLKA

2°39' ± 45' (2.65° ± 0.75°)

Steering axis inclination

Right-left error: 30' (0.5°) or less

UCK35L-GKSSKA

10°37' ± 45' (10.62° ± 0.75°)

UCK35L-GKSLKA

10°40' ± 45' (10.66° ± 0.75°)

UCK45L-GKSSKA

10°29' ± 45' (10.48° ± 0.75°)

UCK45L-GKSLKA

10°30' ± 45' (10.50° ± 0.75°)

Toe-in (total)

Rack end length difference: 1.5 mm (0.059 in.) or less

UCK35L-GKSSKA

Tire size: P245/70R16

0°05' ± 09° (0.09° ± 0.15°, 1.18 ± 2 mm (0.05 ± 0.08 in.)

Tire size: P265/70R16 and P265/65R17

0°05' ± 09' (0.09° ± 0.15°, 1.28 ± 2 mm (0.05 ± 0.08 in.)

UCK35L-GKSLKA

0°05' ± 09' (0.09° ± 0.15°, 1.15 ± 2 mm (0.05 ± 0.08 in.)

UCK45L-GKSSKA

0°05' ± 09' (0.08° ± 0.15°, 1.03 ± 2 mm (0.04 ± 0.08 in.)

UCK45L-GKSLKA

0°04' ± 09' (0.07° ± 0.15°, 0.96 ± 2 mm (0.04 ± 0.08 in.)

Front wheel Alignment

UCK35L-GKSSKA

Inside wheel

34°01' - 37°01' (34.01° - 37.01°)

Outside wheel: Reference

32°08' (32.13°)

UCK35L-GKSLKA

Inside wheel

33°58' - 36°58' (33.96° - 36.96°)

Outside wheel: Reference

32°05' (32.09°)

UCK45L-GKSSKA

Inside wheel

34° 12' - 37° 12' (34.20° - 37.20°)

Outside wheel: Reference

32°17' (32.28°)

UCK45L-GKSLKA

Inside wheel

34°10' - 37°10' (34.17° - 37.17°)

Outside wheel: Reference

32° 16' (32.26°)

Front drive shaft

Front drive shaft length

523.5 ± 2.0 mm (20.610 ± 0.079 in.)

Front suspension

Upper ball joint turning torque

0.7 - 4.4 N.m (7 - 45 kgf.cm, 6 - 39 in..lbf)

Lower ball joint excessive play

Maximum

0.5 mm (0.020 in.)

Lower ball joint turning torque

0.1 - 2.5 N.m (1 - 25 kgf.cm, 1 - 22 in..lbf)

Stabilizer bar link ball joint turning toque

0.05 - 2.0 N.m (0.5 - 20 kgf.cm, 0.4-17 in..lbf)

⁽¹⁾	Ground clearance of the front drive shaft center

⁽²⁾	Ground clearance of the front adjusting cam bolt center

⁽³⁾	Ground clearance of the rear axle shaft center

⁽⁴⁾	Ground clearance of the rear lower control arm front bolt center