Retrieving Diagnostic Trouble Codes
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the DRB scan tool to the data link (diagnostic) connector. This connector is located in the passenger compartment, at the lower edge of instrument panel, near the steering column.
- Turn the ignition switch on and access the "Read Fault" screen.
- Record all the DTC's and "freeze frame" information shown on the DRB scan tool.
- To erase DTC's, use the "Erase Trouble Code" data screen on the DRB scan tool. Do not erase any DTC's until problems have been investigated and repairs have been performed.
SCAN TOOL DTC MESSAGES
| DTC (1) | Scan Tool Display | ||
|---|---|---|---|
| P0071 | AMBIENT TEMPERATURE SENSOR PERFORMANCE | ||
| P0072 | AMBIENT TEMP SENSOR LOW | ||
| P0073 | AMBIENT TEMP SENSOR HIGH | ||
| P0516 | BATTERY TEMPERATURE SENSOR LOW | ||
| P0517 | BATTERY TEMPERATURE SENSOR HIGH | ||
| P0562 | BATTERY VOLTAGE LOW | ||
| P0563 | BATTERY VOLTAGE HIGH | ||
| P0622 | GENERATOR FIELD CONTROL CIRCUIT | ||
| P2503 | CHARGING SYSTEM VOLTAGE LOW | ||
|
|||