LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 430 (Hybrid Vehicle Control System - Diagnostics) >> Pre-Check >> Step - 5 Check For Intermittent Problems
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Step - 5 Check For Intermittent Problems

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform a simulation test. See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION .

    In the simulation test, reproduce the driving condition at the trouble occurrence according to the customer's comments and freeze frame data are recorded with DTC, such as an opening angle of the accelerator pedal, SOC, engine coolant temperature, engine RPM, and MG/1MG2 RPM and torque.

  2. Check the connector and terminal. See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION .
  3. Handle the connector. See . HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION .
scientia non olet · About LEMON Manuals