Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- Check light control switch (See
INSPECTION
).
- NG : Replace light control switch.
- OK : Go to next step.
- Check for harness and connector between light control switch and passenger side J/B ECU (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE
).
- NG : Repair or replace harness and connector.
- OK : Proceed to next circuit inspection shown in problem symptoms table (See PROBLEM SYMPTOMS TABLE ).