Inspection Procedure

WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

Check DVD player
PREPARATION:

Disconnect the DVD player.

CHECK:

Check the voltage of terminal +B.

OK:
1. +B: 10 - 14 V
CHECK:

Check the voltage of terminal ACC when the ignition switch is in ACC or ON position.

OK:
1. ACC: 10 - 14 V
CHECK:

Check continuity at terminal GND.

OK:
1. GND: Continuity
1. NG : Replace or repair wire harness (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE ).
2. OK : Replace DVD player (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE ).
NOTE: When sending it for repair, leave as it is without attempting to take it out by force.