Inspection Procedure

WARNING: This page is about a different car, the 2003 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

Element check mode (See PRE-CHECK ).
1. NG : No problem.
2. NG : Go To Next Step.
Check wire harness and connector.
PREPARATION:

Disconnect the radio and player connector.

CHECK:
1. Continuity of the wire harness between terminal ILL+ of radio and player and battery.
2. Continuity of the wire harness between terminal ILL- of radio and player and terminal ILL- of light control rheostat.
OK:
1. Continuity
1. OK : Replace radio and player (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE ).
2. NG : Replace and repair wire harness (See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE ).