Hood Support Rod: Replacement

WARNING: This page is about a different car, the 2004 Toyota Camry. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE HOOD SUPPORT ROD
1. Using a screwdriver to hold the left spring, disengage the upper and lower parts of the support rod, and then remove the hood support rod.
NOTE: Removal should be done while the hood is being held up.

Fig 1: Removing Hood Support Rod
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HOOD SUPPORT ROD
NOTE:
- Install a metal socket onto the hood except a resinous one onto the body.
- After the installation, make sure that the socket is securely attached.