Removal - Overhead Console
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Open the storage bin and remove the T10 overhead console retaining screw.
- Using your fingertips, grasp the sides of the overhead console and pull down and rearward evenly to disengage the unit.
- Lower the overhead console far enough to access the wire harness connectors.
- Disconnect the electronic module and the reading/courtesy lamps electrical connector.
- Remove the overhead console from the vehicle.