LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 946 (Power Liftgate System) >> Exterior Handle Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exterior Handle Switch: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Disconnect and isolate the negative battery cable.
  3. Open the liftgate and remove the liftgate trim panel. Refer to LIFTGATE .
  4. Disconnect the handle switch electrical connector.
  5. Remove the liftgate handle assembly from the vehicle. Refer to LIFTGATE .
  6. Depress the two exterior handle switch retaining tabs and roll the switch out of the light bar assembly.
scientia non olet · About LEMON Manuals