Antenna Cable - Navigation: Installation
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Connect antenna cable at instrument panel. Install cable to retainers on floor. Connect antenna cable to navigation unit.
- Install navigation unit (Refer to INSTALLATION ).
- Install liftgate scuff plate (Refer to INTERIOR ).
- Install quarter trim panel(Refer to INTERIOR ).
- Install front and rear scuff plates (Refer to INTERIOR ).
- Install side cowl trim(Refer to INTERIOR ).
- Connect battery negative cable.