Specifications - 3.5L Engine
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
SPECIFICATIONS - 3.5L ENGINE
| DESCRIPTION | SPECIFICATION | ||||
|---|---|---|---|---|---|
| Type | 60° SOHC V-6 24-Valve | ||||
| Displacement | 3.5 Liters (214 Cubic Inches) | ||||
| Bore and Stroke | 96.0 x 81.0 mm (3.780x3.189 in.) | ||||
| Compression Ratio | 10:1 | ||||
| Lead Cylinder | #1 Right Bank | ||||
| Firing Order | 1-2-3-4-5-6 | ||||
| Cylinder Block | |||||
| Cylinder Bore Diameter | 96.0 mm +/-0.0076 (3.780 in. +/-0.0003 in.) | ||||
| Out-of-Round (Max.) | 0.076 mm (0.003 in.) | ||||
| Taper (Max.) | 0.051 mm (0.002 in.) | ||||
| Pistons | |||||
| Type Material | Aluminum (Full Floating Pins) | ||||
| Piston Diameter | 95.98 +/- 0.019 mm (3.7788 +/- 0.0008 in.) | ||||
| Clearance at Size Location | -0.007 to +0.047 mm (-0.0003 to +0.0018 in.) | ||||
| Piston Weight - A Weight -B Weight |
438-443 grams (15.45-15.62 oz.) 433-438 grams (15.27-15.45 oz.) |
||||
| Piston Ring Groove Diameter -No. 1 -No. 2 -No. 3 |
87.4-87.6 mm (3.441-3.449 in.) 86.3-86.5 mm (3.397-3.4055 in.) 85.8-86.0 mm (3.378-3.385 in.) |
||||
| Piston Pins | |||||
| Type | Full Floating | ||||
| Clearance in Piston | 0.005-0.015 mm (0.0002-0.0006 in.) | ||||
| Clearance in Rod | 0.007-0.018 mm (0.0003-0.007 in.) | ||||
| Diameter | 23.997-24.000 mm (0.9448-0.9449 in.) | ||||
| Piston Rings | |||||
| Ring Gap-Top Compression Ring | 0.20-0.36 mm (0.008-0.014 in.) | ||||
| Ring Gap-2nd Compression Ring | 0.23-0.50 mm (0.0091-0.0197 in.) | ||||
| Ring Gap-Oil Control (Steel Rails) | 0.25-0.76 mm (0.010-0.030 in.) | ||||
| Ring Side Clearance | |||||
| Top and Second Compression Ring | 0.04-0.08 mm (0.0016-0.0031 in.) | ||||
| Oil Ring (Steel Rails) | 0.038-0.184 mm (0.0015-0.0073 in.) | ||||
| Ring Width | |||||
| Top Compression Ring | 1.17-1.19 mm (0.0461-0.0469 in.) | ||||
| 2nd Compression Ring | 1.47-1.49 mm (0.058-0.059 in.) | ||||
| Oil Ring (Steel Rings) | 0.445-0.470 mm (0.0176-0.0186 in.) | ||||
| Connecting Rods | |||||
| Bearing Clearance | 0.019-0.081 mm (0.0007-0.0031 in.) | ||||
| Piston Pin Bore Diameter | 24.0076-24.0153 mm (0.9452-0.9455 in.) | ||||
| Side Clearance (Max.) | 0.39 mm (0.0153 in.) | ||||
| Total Weight (Less Bearing) | 647 grams (22.8223 oz.) | ||||
| Crankshaft Main Bearing Journals | |||||
| Diameter | 63.987-64.013 mm (2.519-2.520 in.) | ||||
| Main Bearing Diametrical Clearance -(Max. Allowable) |
0.011-0.077 mm (0.0007-0.0030 in.) 0.087 mm (0.0034 in.) |
||||
| Out-of-Round (Max.) | 0.015 mm (0.0006 in.) | ||||
| Taper (Max.) | 0.015 mm (0.0006 in) | ||||
| End Play -(Max.) |
0.10-0.30 mm (0.004-0.012 in.) 0.43 mm (0.017 in.) |
||||
| Connecting Rod Journals | |||||
| Diameter | 57.982-58.002 mm (2.282-2.283 in.) | ||||
| Bearing Diametrical Clearance | 0.048-0.084 mm (0.001-0.003 in.) | ||||
| Out-of-Round (Max.) | 0.005 mm (0.0001 in.) | ||||
| Taper (Max.) | 0.007 mm (0.0002 in.) | ||||
| Camshaft | |||||
| Bore Diameter | 43.038-43.059 mm (1.6944-1.6952 in.) | ||||
| Bearing Journal Diameter | 42.939-42.960 mm (1.6905-1.6913 in.) | ||||
| Diametrical Clearance -(Max.) |
0.078-0.12 mm (0.003-0.0047 in.) 0.15 mm (0.0059 in.) |
||||
| End Play | 0.03-0.35 mm (0.001-0.014 in.) | ||||
| Valve Timing-Intake Valve | |||||
| Opens (ATDC) | 3° | ||||
| Closes (ABDC) | 61° | ||||
| Duration | 238° | ||||
| Centerline | 122° | ||||
| Valve Timing-Exhaust Valve | |||||
| Opens (BBDC) | 56° | ||||
| Closes (ATDC) | 16° | ||||
| Duration | 252° | ||||
| Centerline | 110° | ||||
| Valve Overlap | 13° | ||||
| Cylinder Head | |||||
| Gasket Thickness (Compressed) | 1.78 mm (0.059 in.) | ||||
| Valve Seat Angle | 45-45.5° | ||||
| Valve Seat Runout (Max.) | 0.051 mm (0.002 in.) | ||||
| Valve Seat Width-Intake | 0.8-1.2 mm (0.031-0.0472 in.) | ||||
| Valve Seat Width - Exhaust | 1.3-1.7 mm (0.05-0.067 in.) | ||||
| Guide Bore Diameter (Std.) | 6.975-7.00 mm (0.2746-0.2756 in.) | ||||
| Valve Guide Height(1) | 9.5-10.5 mm (0.3740-0.4134 in.) | ||||
| Valves | |||||
| Face Angle | 44.5-45° | ||||
| Head Diameter-Intake | 36.37-36.63 mm (1.4319-1.4421 in.) | ||||
| Head Diameter-Exhaust | 28.87-29.13 mm (1.1366-1.1469 in.) | ||||
| Length-Intake (Overall) | 114.41-114.99 mm (4.5043-4.5272 in.) | ||||
| Length-Exhaust (Overall) | 125.67-126.25 mm (4.9476-4.9705 in.) | ||||
| Stem Diameter-Intake | 6.935-6.953 mm (0.2730-0.2737 in.) | ||||
| Stem Diameter-Exhaust | 6.906-6.924 mm (0.2719-0.2726 in.) | ||||
| Stem-to-Guide Clearance-Intake -(Max.) Rocking Method |
0.022-0.065 mm (0.0009-0.0026 in.) 0.29 mm (0.0114 in.) |
||||
| Stem-to-Guide Clearance-Exhaust -(Max.) Rocking Method |
0.051-0.094 mm (0.002-0.0037 in.) 0.370 mm (0.0146 in.) |
||||
| Valve Lift-Intake (Zero Lash) | 8.55 mm (0.3367 in.) | ||||
| Valve Lift-Exhaust (Zero Lash) | 6.53 mm (0.2571 in.) | ||||
| Valve Margin - Intake: | 0.835-1.165 mm (0.0329-0.0459 in.) | ||||
| Valve Margin - Exhaust: | 1.44-1.77 mm (0.0567-0.0697 in.) | ||||
| Valve Stem Tip Height-Intake | 42.366-43.655 mm (1.6680-1.7187 in.) | ||||
| Valve Stem Tip Height-Exhaust | 44.705-45.986 mm (1.760-1.8105 in.) | ||||
| Valve Springs | |||||
| Free Length-Intake (Approx.) | 43.675 mm (1.7195 in.) | ||||
| Free Length-Exhaust - Yellow (Approx.) | 47.1 mm (1.8543 in.) | ||||
| Free Length-Exhaust - White (Approx.) | 48.3 mm (1.9015 in.) | ||||
| Spring Force-Intake (Valve Closed) | 309-358 N @ 38.0 mm (69.5-80.5 lbs. @ 1.4961 in.) | ||||
| Spring Force-Exhaust - Yellow (Valve Closed) | 314-354 N @ 29.85 mm (71-79 lbs. @ 1.175 in.) | ||||
| Spring Force-Exhaust - White (Valve Closed) | 355-401 N @ 38 mm (80-90 lbs. @ 1.4961 in.) | ||||
| Spring Force-Intake (Valve Open) | 836-907 N @ 29.45 mm (188-204 lbs. @ 1.1594 in.) | ||||
| Spring Force-Exhaust (Valve Open) | 621-687 N @ 31.47 mm (140-154 lbs. @ 1.239 in.) | ||||
| Number of Coils-Intake | 6.86 | ||||
| Number of Coils - Exhaust | 7.66 | ||||
| Color of Spring (Top of Coils) -Intake (Right Hand Coil Direction) -Exhaust (Left Hand Coil Direction) |
Orange Yellow or White |
||||
| Wire Diameter-Intake | 4.35 mm (0.1712 in.) | ||||
| Wire Diameter-Exhaust | 3.93-- 3.99 mm (0.1547-0.1570 in.) | ||||
| Spring Installed Height (Spring Seat to Bottom of Retainer)-Intake & Exhaust | 38.0 mm (1.4961 in.) | ||||
| Oil Pump | |||||
| Clearance Over Rotors | 0.077 mm (0.003 in.) | ||||
| Cover Out-of-Flat (Max.) | 0.025 mm (0.001 in.) | ||||
| Inner & Outer Rotor Thickness (Min.) | 14.299 mm (0.563 in.) | ||||
| Outer Rotor Thickness (Max.) | 0.39 mm (0.015 in.) | ||||
| Outer Rotor Diameter (Min.) | 79.997 mm (3.149 in.) | ||||
| Tip Clearance Between Rotors (Max.) | 0.20 mm (0.008 in.) | ||||
| Oil Pressure | |||||
| (NOTE: At Normal Operating Temperatures) | |||||
| Pressure @ Curb Idle Speed(2) | 34.47 kPa Min. (5 psi) Min. | ||||
| Pressure @ 3000 RPM | 300-724 kPa (45-105 psi) | ||||
CAUTION:
|
|||||