LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Exhaust System) >> Cross-Over Pipe >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cross-Over Pipe: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position cross-over pipe to the manifold connections.
  2. Position new gaskets and loosely install fasteners.
  3. Tighten fastener to 41 N.m (30 ft. lbs.).
  4. Install the cross-over support fastener. Tighten fastener to 41 N.m (30 ft. lbs.).
  5. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
  6. Check the exhaust system for contact with the body panels. Make the necessary ajustments, if needed.
scientia non olet · About LEMON Manuals