Monitor Description

The throttle position sensor varies its resistance with the throttle valve angle. The ECM applies a regulated reference voltage to the throttle position sensor "+: VC" terminal and calculates the angle of the throttle valve based on the voltage present at the throttle position sensor "signal: VTA" terminal.

When the throttle valve is near the fully closed position, the output voltage of the throttle position sensor is low. When it is near the fully open position, the output voltage is high.

If the ECM detects that the output voltage of the throttle position sensor is out of the normal range, the ECM interprets this as a malfunction in the throttle position sensor and sets a DTC.