Inspection Procedure

1. Reset the power window regulator motor (see INITIALIZATION  ).
2. Check if the power window AUTO UP/DOWN function operates normally.

   OK: AUTO UP/DOWN function operates normally. 

NG: Go to step 2 

OK: END 

1. Remove the door glass (see WINDSHIELD/WINDOWGLASS/MIRROR ).
2. Operate the front door window regulator assembly using the switch.
3. Check if the power window regulator assembly operates smoothly.

   OK: Power window regulator assembly operates smoothly. 

NG: REPLACE FRONT DOOR WINDOW REGULATOR ASSY LH 

OK: REPLACE DOOR GLASS RUN