Torque Specification
STEERING TORQUE SPECIFICATIONS
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| TILT STEERING COLUMN | |||
| Adjusting nut | See REASSEMBLY | ||
| No. 2 intermediate shaft assembly x Main shaft assembly | 36 | 360 | 26 |
| Column assembly set bolt | 21 | 210 | 15 |
| No. 2 intermediate shaft assembly x Steering intermediate extension | 36 | 360 | 26 |
| Steering wheel set nut | 50 | 500 | 35 |
| Steering wheel pad set screw (Torx screw) | 8.8 | 90 | 78 in.lbf |
| POWER STEERING VANE PUMP | |||
| Front housing x Rear housing | 22 | 220 | 16 |
| Oil pressure switch | 21 | 210 | 15 |
| Pressure port union | 69 | 700 | 51 |
| Suction port union set bolt | 12 | 120 | 9 |
| PS vane pump assembly x Engine | 30 (43) | 305 (440) | 22 (32) |
| Pressure feed tube x PS vane pump assembly | 51.5 | 525 | 38 |
| POWER STEERING GEAR | |||
| Control valve self-locking nut | 12 | 125 | 9 |
| Rack housing cap x Rack housing | 69 | 700 | 51 |
| Rack guide spring cap lock nut x Rack housing | 32 (44) | 330 (450) | 24 (32) |
| Rack end x Steering rack | 60 (83) | 615 (850) | 44 (61) |
| No. 1 rack housing bracket x Rack housing | 61 | 615 | 44 |
| Tie rod end lock nut | 74 | 750 | 54 |
| Turn pressure tube x PS gear assembly | 27 (29.5) | 270 (300) | 20 (22) |
| Pressure feed tube x PS gear assembly | 40 (44) | 410 (450) | 29 (32) |
| Return tube x PS gear assembly | 40 (44) | 410 (450) | 29 (32) |
| Steering intermediate extension x Control valve assembly | 35 | 360 | 26 |
| PS gear assembly x Front suspension crossmember | 137 | 1,400 | 101 |
| Pressure feed tube clamp mounting bolt | 12.5 | 130 | 9 |
| Return tube clamp mounting bolt | 12.5 | 130 | 9 |
| Stabilizer bar x Front suspension crossmember | 29 | 300 | 22 |
( ): For use without SST