Generator Specifications
GENERATOR SPECIFICATIONS
| Application | Specification | |||||
|---|---|---|---|---|---|---|
| Brush Length | ||||||
| Standard | .374-.453 Inch (9.5-11.5 mm) | |||||
| Limit (Minimum) | More Than .059 Inch (1.5 mm) | |||||
| Rotor | ||||||
| Resistance (1) | ||||||
| 90-Amp | 2.1-2.5 Ohms | |||||
| 100-Amp | 2.3-2.7 Ohms | |||||
| Slip Ring Diameter | ||||||
| Standard | .551-.567 Inch (14.0-14.4 mm) | |||||
| Minimum | ||||||
| 90-Amp | .504 Inch (12.8 mm) | |||||
| 100-Amp | .551 Inch (14.0 mm) | |||||
| Generator Regulated Output | ||||||
| Amperage | ||||||
| Without Load | 10 Or Less Amps | |||||
| With Load | 30 Or More Amps | |||||
| Voltage | 13.2-14.8 Volts | |||||
|
||||||