LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Sequoia Limited, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> SFI System >> Fuel Pressure Regulator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Regulator: Installation

  1. INSTALL FUEL PRESSURE REGULATOR 
    1. Apply a light coat of gasoline to a new O-ring, and install it to the pressure regulator.
    2. While turning the pressure regulator left and right, install it to the delivery pipe.
    3. Install the pressure regulator with the 2 bolts.

      Torque: 7.5 N.m (80 kgf.cm, 66 in.lbf) 

      Fig 1: Turning Pressure Regulator
      G04207833Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the vacuum hose to intake air resonator.
    5. Connect the fuel return hose to the pressure regulator.
  2. CHECK FOR FUEL LEAKS (See  PRECAUTION   ) 
    Fig 2: Connecting Fuel Return Hose
    G04207834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals