LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Sienna CE >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Adjustment Procedures >> Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Alignment Specifications & Adjustment Procedures: Specifications

Front Wheel Alignment Specifications

Front wheel alignment Vehicle height    
FF Front: A-B 114 mm (4.48 in.)
Rear: D - C -18 mm (-0.7 in.)
4WD Front: A-B 116 mm (4.57 in.)
Rear: D - C -53.5 mm (-21 in.)
Toe-in (total)   0° ± 12' (0° ± 0.2°) 0 ± 2 mm (0 ± 0.08 in.)
Rack end length difference 1.5 mm (0.059 in.) or less
Wheel angle    
FF Inside wheel 42°45' ± 2° (42.75° ± 2°)
Outside wheel: Reference 36°21' (36.35°)
4WD Inside wheel 42°42' ± 2° (42.70° ± 2°)
Outside wheel: Reference 36° 16' (36.27°)
Camber   -0°17' ± 45' (-0.28° ± 0.75°)
Right-left error 30' (0.5°) or less
Caster FF: 2°48' ± 45' (2.80° ± 0.75°)
4WD: 2°40' ± 45' (2.67° ± 0.75°)
Right-left error 30' (0.5°) or less
Steering axis inclination FF: 10°25' ± 45' (10.42° ± 0.75°)
4WD: 10°12' ± 45' (10.02° ± 0.75°)
Right-left error 30' (0.5°) or less
Front suspension Lower ball joint turning torque   0.98 - 3.43 N.m (10 - 35 kgf.cm, 8.7 - 30 in..lbf)
Stabilizer bar link ball joint turning torque   0.05 - 1.96 N.m (0.5 - 20 kgf.cm, 0.4 - 17.4 in..lbf)
A: Ground clearance of front wheel center 
B: Ground clearance of lower suspension arm No. 2 set bolt center 
C: Ground clearance of rear axle carrier bush set bolt center 
D: Ground clearance of rear wheel center 
Rear Wheel Alignment Specifications

Rear wheel alignment Toe-in (total)    
2WD: 215/65R16 0°15' ± 17' (0.25° ± 0.28°, 2.7 ± 3.0 mm, 0.11 ± 0.12 in.)
225/60R17 0°15' ± 17' (0.25° ± 0.28°, 2.8 ± 3.0 mm, 0.11 ± 0.12 in.)
4WD: 225/60R17 0°07' ± 17' (0.12° ± 0.28°, 1.3 ± 3.0 mm, 0.05 ± 0.12 in.)
Camber 2WD: -1°22' ± 30' (-1.37° ± 0.5°)
Right-left error 30' (0.5°) or less
4WD: -1°25' ± 30' (-1.42° ± 0.5°)
Right-left error 30' (0.5°) or less
Length of shock absorber  
    2WD: 234 mm (9.22 in.)
    4WD: 258 mm (10.16 in.)