Power Mirror Control System: Inspection
- INSPECT OUTER MIRROR SWITCH ASSY
- The L side of the left/right adjustment switch: Inspect the mirror switch resistance.
Standard (Left side):
If the result is not as specified, replace the switch assy.
- The R side of the left/right adjustment switch:
Standard (Right side):
If the result is not as specified, replace the switch assy.
- The L side of the left/right adjustment switch: Inspect the mirror switch resistance.
- INSPECT OUTER REAR VIEW MIRROR ASSY LH
- Disconnect the mirror connector.
- Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.
Standard (LH):
MEASUREMENT CONDITION AND MIRROR OPERATIONMeasurement Condition Mirror Operation Battery positive (+) --> MV (6) Battery negative (-) --> M+ (7) Turns upward (A) Battery positive (+) --> M+ (7)Battery negative (-) --> MV (6) Turns downward (B) Battery positive (+) --> M+ (7)Battery negative (-) --> MH (8) Turns left (C) Battery positive (+) --> MH (8) Battery negative (-) --> M+ (7) Turns right (D) If the result is not as specified, replace the mirror assy.
- INSPECT OUTER REAR VIEW MIRROR ASSY RH
- Disconnect the mirror connector.
- Apply battery voltage and inspect operation of the mirror face, as shown in the table and illustration.
Standard (RH):
MEASUREMENT CONDITION AND MIRROR OPERATIONMeasurement Condition Mirror Operation Battery positive (+) --> MV (6)Battery negative (-) --> M+ (7) Turns upward (A) Battery positive (+) --> M+ (7)Battery negative (-) --> MV (6) Turns downward (B) Battery positive (+) --> M+ (7) Battery negative (-) --> MH (8) Turns right (D) Battery positive (+) --> MH (8) Battery negative (-) --> M+ (7) Turns left (C) If the result is not as specified, replace the mirror assy.