LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Tacoma Base, 4D Pickup >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System (5VZ-FE) >> Camshaft Position Sensor >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Replacement

  1. REMOVE NO. 2 TIMING BELT COVER (See  REMOVAL  ) 
  2. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
  3. REINSTALL NEW CAMSHAFT POSITION SENSOR 
    1. Install a new sensor with the bolt.

      Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf) 

    2. Connect the sensor connector.
  4. REINSTALL NO. 2 TIMING BELT COVER (See  INSTALLATION  ) 
    Fig 1: Removing Camshaft Position Sensor
    G04241432Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals