LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Tacoma S-Runner >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures >> Air Conditioning >> Manual System >> Service Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Specifications

AIR CONDITIONING SPECIFICATIONS

Application Specification
Compressor Type (1)
Compressor Belt Tension (2)
New Belt 135-185 lbs. (61-84 kg)
Used Belt (3) 80-120 lbs. (36-54 kg)
Compressor Oil Capacity (4) (1)
Condenser Oil Capacity (4) 1.4 ozs.
Evaporator Oil Capacity (4) 1.4 ozs.
Receiver Oil Capacity (4) .7 oz.
Refrigerant (R-134a) Capacity 19.4-22.9 ozs.
System Operating Pressures (5)
High Side 199-228 psi (14-16 kg/cm2 )
Low Side 21-36 psi (1.5-2.5 kg/cm2 )
(1) Information is not available from manufacturer.
(2) Use belt tension gauge for checking compressor belt tension.
(3) Used belt is a belt that has been in operation at least 5 minutes.
(4) Use ND-OIL 8 refrigerant oil or equivalent.
(5) With ambient temperature at 86-95°F (30-35°C) at air inlet with switch in RECIRC position, engine at 1500 RPM, blower switch in HI position and temperature control dial in COOL position.
scientia non olet · About LEMON Manuals