LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Tundra Base, Standard >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specs & Procedures >> Engine Cooling >> Service >> Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Cooling: Service: Specifications

V6 COOLING SYSTEM SPECIFICATIONS

Application Specification
Coolant Replacement Interval (1)
First Time 100,000 Miles
Subsequent 50,000 Miles
Coolant Capacity
A/T 10.5 Qts. (9.9L)
M/T 10.6 Qts. (10L)
Pressure Cap Standard Opening Pressure (2) 10.7-14.9 psi (.75-1.05 kg/cm2 )
Thermostat Opening Temperature (3) 176-183°F (80-84°C)
(1) The Toyota Super Long Life Coolant (SLLC) has been adopted.
(2) Minimum opening pressure is 8.6 psi (.6 kg/cm2 ).
(3) Thermostat valve lift should be .335" (8.5 mm) or more at 203°F (95°C).
V8 COOLING SYSTEM SPECIFICATIONS

Application Specification
Coolant Replacement Interval (1)
First Time 100,000 Miles
Subsequent 50,000 Miles
Coolant Capacity
Standard & Access Cab Models 12.3 Qts. (11.6L)
Double Cab Models 12.4 Qts. (11.7L)
Pressure Cap Standard Opening Pressure (2) 10.7-14.9 psi (.75-1.05 kg/cm2 )
Thermostat Opening Temperature (3) 176-183°F (80-84°C)
(1) The Toyota Super Long Life Coolant (SLLC) has been adopted.
(2) Minimum opening pressure is 8.6 psi (.60 kg/cm2 ).
(3) Thermostat valve lift should be .39 in. (10 mm) or more at 203°F (95°C).

THERMOSTAT R & I 

WATER PUMP R & I 

scientia non olet · About LEMON Manuals