Torque Specification
STEERING SYSTEM TORQUE SPECIFICATIONS
| Part tightened | N.m | kgf.cm | ft.lbf | |||
|---|---|---|---|---|---|---|
| STEERING COLUMN | ||||||
| Steering wheel pad set screw (Torx screw) | 8.8 | 90 | 78 in..lbf | |||
| Steering wheel set nut | 50 | 500 | 35 | |||
| Control valve shaft x No. 2 intermediate shaft assembly | 35 | 360 | 26 | |||
| No. 2 intermediate shaft assembly x No. 2 universal joint assembly | 35 | 360 | 26 | |||
| No. 2 universal joint assembly x Main shaft assembly | 35 | 360 | 26 | |||
| Steering column assembly set nut | 26 | 260 | 19 | |||
| Column hole cover set bolt | 8.0 | 82 | 71 in..lbf | |||
| Shift lever set bolt | A/T | 18 | 180 | 13 | ||
| Shift lever housing x Column housing support | A/T | 12 | 120 | 9 | ||
| Non-tilt steering column: | ||||||
| Turn signal bracket x Column upper tube | 7.5 | 75 | 65 in..lbf | |||
| Column upper tube x Column tube assembly | 19 | 195 | 14 | |||
| Tilt steering column: | ||||||
| Turn signal bracket x Steering column housing | 7.5 | 75 | 65 in..lbf | |||
| Column housing support x Column tube assembly | 19 | 195 | 14 | |||
| PS VANE PUMP (5VZ-FE) | ||||||
| Union bolt x Pressure feed tube | 46.5 | 475 | 34 | |||
| Pressure port union x Pump housing | 83 | 850 | 61 | |||
| Bracket x Pump assembly | 44 | 440 | 32 | |||
| Oil reservoir set bolt | Front | 13 | 130 | 9 | ||
| Rear | 24 | 240 | 17 | |||
| Front housing x Rear housing | 24 | 240 | 17 | |||
| Vane pump assembly with bracket set bolt and nut | 44 | 450 | 33 | |||
| Oil pressure switch x Pressure feed tube | 20.6 | 210 | 15 | |||
| PS VANE PUMP (2UZ-FE) | ||||||
| Union bolt x Pressure feed tube | 46.5 | 475 | 34 | |||
| PS vane pump assembly set stud bolt | 22 | 220 | 16 | |||
| PS vane pump assembly set bolt and nut | 44 | 450 | 33 | |||
| Suction port union set bolt | 13 | 130 | 9 | |||
| Pressure port union | 83 | 850 | 61 | |||
| Front housing x Rear housing | 24 | 240 | 17 | |||
| PS GEAR | ||||||
| Turn pressure tube union nut | 12 (15) | 117 (150) | 9 (11) | |||
| Tie rod end lock nut | 55 | 560 | 41 | |||
| Rack x Rack end | 76 (103) | 770 (1,050) | 56 (76) | |||
| Rack guide spring cap lock nut | 51 (69) | 520 (700) | 38 (51) | |||
| Rack housing cap | 59 | 600 | 43 | |||
| Self-locking nut | 30 | 300 | 22 | |||
| Control valve housing set bolt | 18 | 185 | 13 | |||
| PS gear assembly set bolt | 165 | 1,700 | 123 | |||
| PS gear assembly set bolt and nut | 130 | 1,350 | 96 | |||
| Bracket x Body | Bolt and nut | 165 | 1,700 | 123 | ||
| Bracket x Body | Stud bolt | 20 | 200 | 15 | ||
| Pressure feed and return tubes x Control valve housing | 32 (25) | 326 (250) | 27 (18) | |||
| No. 2 intermediate shaft assembly x No. 2 universal joint assembly | 35 | 360 | 26 | |||
| Control valve shaft x No. 2 intermediate shaft assembly | 35 | 360 | 26 | |||
| Tie rod end x Lower arm | 91 | 930 | 67 | |||
| (): For use without SST | ||||||