LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2005 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Accelerator Pedal Rod ASSY (2UZ-FE) >> Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Rod ASSY (2UZ-FE): Replacement

  1. REMOVE ACCELERATOR PEDAL ROD ASSY 
    1. Disconnect a accelerator pedal connector.
    2. Remove the 2 nuts and accelerator pedal assy.
    Fig 1: Removing Accelerator Pedal Rod Assy
    G02578097Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ACCELERATOR PEDAL ROD ASSY 
    NOTE:
    • Be care not to give a shock to the accelerator pedal assy.
    • Be care not to disassemble the accelerator pedal assy.
    1. Install the accelerator pedal assy with the 2 nuts.

      Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf) 

    2. Connect a accelerator pedal connector.
scientia non olet · About LEMON Manuals