Torque Specification
TORQUE SPECIFICATION - POWER STEERING
| Part tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| VANE PUMP ASSY | |||
| Housing rear x Housing front | 22 | 224 | 16 |
| Pressure port union | 69 | 704 | 51 |
| Suction port union set bolt | 12 | 122 | 9 |
| Pump assy set bolt | 43 | 439 | 32 |
| Pressure feed tube assy set union bolt | 52 | 525 | 38 |
| Oil pressure switch | 21 | 214 | 16 |
| POWER STEERING LINK ASSY | |||
| Control valve housing set bolt | 20 | 204 | 15 |
| Rack housing cap nut | 25 | 250 | 18 |
| Rack housing cap | 54 | 546 | 40 |
| Rack guide spring cap lock nut | 48 (69) | 487 (699) | 35(51) |
| Rack x Rack end sub-assy | 50 (84) | 505(851) | 37 (62) |
| Tie rod assy lock nut | 74 | 755 | 55 |
| Turn pressure tube union nut | 11 (13) | 113(128) | 8(9) |
| Steering link assy set bolt | 70 | 714 | 52 |
| Pressure feed tube assy union nut | 22 (25) | 227 (250) | 16(18) |
| Pressure feed tube clamp set bolt | 9.8 | 100 | 87in.lbf |
| Stabilizer bracket No.1 x Suspension crossmember | 19 | 194 | 14 |
| Stabilizer link assy set nut | 74 | 755 | 55 |
| Intermediate shaft assy x Steering link assy | 35 | 360 | 26 |
(): For use without SST